Το καλάθι σας

Δεν έχετε προσθέσει προϊόντα στο καλάθι σας!

ΕΠΙΣΤΡΟΦΗ ΣΤΙΣ ΑΓΟΡΕΣ ΣΑΣ

FESTO - ΚΥΛΙΝΔΡΟΣ ΔΙΠ. ΕΝΕΡΓ. DSNU-25-180-PPS-A

Κάντε κλικ στη φωτογραφία για zoom

FESTO - ΚΥΛΙΝΔΡΟΣ ΔΙΠ. ΕΝΕΡΓ. DSNU-25-180-PPS-A

€84,81 €99,78

Κωδικός προϊόντος: 193991-180

Διαθέσιμο σε 4-5 εργάσιμες

Περιγραφή Προϊόντος
Επιπλέον Χαρακτηριστικά

ISO cylinder

DSNU-25-

Stroke1 mm ... 500 mm
Piston diameter25 mm
CushioningElastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends
Mounting positionoptional
Conforms to standardCETOP RP 52 P ISO 6432
DesignPiston Piston rod Cylinder barrel
Position detectionVia proximity switch
VariantsIncreased chemical resistance Extended male piston rod thread Piston rod with female thread Custom thread on the piston rod Piston rod with male thread shortened at one end Extended piston rod Clamping unit on the piston rod Axial supply port With direct mounting Lateral supply port With protection against rotation High corrosion protection Uniform, slow movement Low friction Through piston rod Heat-resistant seals max. 120°C Piston rod at one end
Protection against torque/guideSquare piston rod
Operating pressure0.1 MPa ... 1 MPa
Operating pressure1 bar ... 10 bar
Mode of operationDouble-acting
CE mark (see declaration of conformity)To EU Explosion Protection Directive (ATEX)
CE marking (see declaration of conformity)To UK EX instructions
Explosion protection certification outside the EUEPL Db (GB) EPL Gb (GB)
Explosion protectionZone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX)
ATEX category gasII 2G
ATEX category dustII 2D
Explosion ignition protection type for gasEx h IIC T4 Gb
Explosion ignition protection type for dustEx h IIIC T120°C Db
Explosion ambient temperature-20°C <= Ta <= +60°C
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC2 - Moderate corrosion stress 3 - high corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L VDMA24364 zone III
Ambient temperature-20 °C ... 120 °C
Impact energy in end positions0.3 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke247 N ... 295 N
Type of mountingWith accessories
Pneumatic connectionG1/8
Note on materialsRoHS-compliant
Material coverWrought aluminium alloy
Material sealsNBR TPE-U(PU)
Material piston rodHigh-alloy stainless steel
Material cylinder barrelHigh-alloy stainless steel

Επιλέξτε Ποσότητα:-+

ΠΡΟΣΘΗΚΗ ΣΤΑ ΑΓΑΠΗΜΕΝΑ

Η εταιρεία P.S.S HELLAS E.E. εφαρμόζει σύστημα διαχείρισης ποιότητας σύμφωνα με τις απαιτήσεις του Διεθνούς προτύπου ΕΝ ISO 9001, με αριθμό πιστοποίησης: .