Stroke1 mm ... 500 mm
Piston diameter25 mm
Piston rod threadM6 M10x1.25
Based on standardISO 6432
CushioningElastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends
Mounting positionoptional
Piston-rod endMale thread Female thread
DesignPiston Piston rod Cylinder barrel
Position detectionVia proximity switch
VariantsHard scraper For unlubricated operation Increased chemical resistance Extended male piston rod thread Extended piston rod Bearing cap without mounting thread Lateral supply port Through piston rod Heat-resistant seals max. 120°C Temperature range -40 to 80°C Piston rod at one end
Operating pressure0.1 MPa ... 1 MPa
Operating pressure1 bar ... 10 bar
Mode of operationDouble-acting
CE mark (see declaration of conformity)To EU Explosion Protection Directive (ATEX)
CE marking (see declaration of conformity)To UK EX instructions
Explosion protectionZone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
ATEX category gasII 2G
ATEX category dustII 2D
Explosion ignition protection type for gasEx h IIC T4 Gb
Explosion ignition protection type for dustEx h IIIC T120°C Db
Explosion ambient temperature-20°C <= Ta <= +60°C
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC3 - high corrosion stress
LABS (PWIS) conformityVDMA24364-B2-L
Suitable for use with foodSee supplementary material information
Ambient temperature-40 °C ... 120 °C
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke247 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke295 N
Moving mass for 0 mm stroke73 g
Additional moving mass per 10 mm stroke6 g
Basic weight for 0 mm stroke410 g
Additional weight per 10 mm stroke11 g
Type of mountingWith accessories
Pneumatic connectionG1/8
Note on materialsRoHS-compliant
Material coverHigh-alloy stainless steel
Material piston rodHigh-alloy stainless steel
Material cylinder barrelHigh-alloy stainless steel

Η εταιρεία P.S.S HELLAS E.E. εφαρμόζει σύστημα διαχείρισης ποιότητας σύμφωνα με τις απαιτήσεις του Διεθνούς προτύπου ΕΝ ISO 9001, με αριθμό πιστοποίησης: .